Energy and Oilfield
Injection Molding
Oil & Gas. Renewables. Utilities. 25+ Years.
Texas Injection Molding produces injection molded valve bodies, fittings, sensor housings, equipment enclosures, and structural components for oil and gas, renewable energy, and utility power OEMs — from the US energy corridor. 25+ years serving energy manufacturers from our 90,000 sq ft Houston facility, with direct relationships with global resin producers for specialty material sourcing.
Energy and Oilfield
Injection Molding
Oil & Gas. Renewables. Utilities. 25+ Years.
Texas Injection Molding produces injection molded valve bodies, fittings, sensor housings, equipment enclosures, and structural components for oil and gas, renewable energy, and utility power OEMs — from the US energy corridor. 25+ years serving energy manufacturers from our 90,000 sq ft Houston facility, with direct relationships with global resin producers for specialty material sourcing.
Injection Molded Components for the Energy Industry
ITAR Compliant | ISO 9001:2015 | FDA Registered
Core Energy Injection Molding Capabilities
Oil and gas equipment, solar and renewable energy, EV charging infrastructure, and power utility components — from the Houston energy corridor
Oil & Gas: Valve bodies, fittings, protective covers, sensor housings, and downhole component enclosures in PPS, glass-filled nylon, and PEEK
Solar / Renewables: Panel mounting clips, junction box bodies, wire management hardware, and microinverter enclosures in UV-stabilized grades
EV Charging Infrastructure: Charging pedestal enclosures, conduit components, and charging station housings in UL-rated materials
Power / Utilities: Meter housing components, switchgear parts, and utility infrastructure components
High-performance resin sourcing: Direct coordination with global resin producers for specialty energy-grade materials
30+ presses, 55 to 1,350 tons: Covering the full energy component size range in a single Houston facility
Energy Industry Material & Quality Standards
Energy sector materials must be validated against specific chemical environments, UV exposure profiles, and regulatory requirements — not selected from a standard catalog.
Chemical Resistance: Validated against hydrocarbons, drilling fluids, and produced water at service conditions
UV-Stabilized Materials: For 25-year outdoor solar and EV charging service life — sourced and documented
UL 94 Flame-Rated Materials: For power and utility electrical applications with process documentation
ISO 9001:2015 | ITAR Compliant | FDA Registered: Full quality and regulatory documentation for energy OEMs
Chemical Resistance: Validated, Not Assumed
We validate resin selection against your specific chemical environment — produced water chemistry, H2S concentration, temperature, and pressure profile. PPS for aggressive chemical environments, PEEK for high-temperature and high-pressure zones, glass-filled nylon for structural performance at temperature.
The right material for your application, sourced through our direct relationships with global resin producers.
UV-Stabilized Grades for 25 Years of Solar Service
Solar junction boxes, mounting clips, and wire management hardware must maintain their properties through 25 years of UV cycling and outdoor weathering.
We source and specify UV-stabilized grades with documented weathering performance for solar applications — the same material discipline that has supported our energy customers for over two decades.
Why Energy OEMs Choose TXIM
25+ years embedded in the US energy corridor — with direct resin producer access, ITAR compliance, and a 90,000 sq ft Houston facility that energy OEMs have relied on for decades.
25+ Years in the Energy Corridor
Houston is the center of the US energy industry. We have served energy OEMs from this location for over 25 years — as a long-term manufacturing partner, not a new market entry.
Direct Resin Producer Relationships
We coordinate with global chemical companies and resin producers to source specialty grades for energy applications — a sourcing capability built over 25 years of energy market experience.
ITAR Compliant
For energy programs with government, defense-adjacent, or export control requirements, our ITAR compliance and documentation capability provide the supply chain records those programs require.
1,350-Ton Press Capacity
Our press fleet covers components from small valve fittings to large equipment enclosure panels — the full energy component size range, in a single facility.
The Energy Industry's Molder
Texas Injection Molding was built in Houston and has served the energy industry from this location for over 25 years. Our ISO 9001:2015 certification, FDA registration, and ITAR compliance reflect the quality systems that energy OEM supply chains require — and our direct resin producer relationships reflect the material sourcing depth that energy applications demand.
As a Plastic News Processor of the Year Finalist, our manufacturing excellence is recognized by the industry. That recognition is built on exactly the kind of demanding programs that energy sector manufacturers bring to us: specialty materials, validated chemical resistance, and production consistency across the program lifecycle.
Start Your Injection Molding Project
Whether you’re in energy, defense, medical, or consumer products — we have the expertise, equipment, and certifications to bring your injection molding project to life.
Get In Touch
Call us
Monday – Friday, 8am – 5pm CT
Email us
info@texasinjectionmolding.com
We’ll respond within 24 hours
Visit us
Houston, TX 77034
Visit www.texasinjectionmolding.com to learn more about our capabilities.